ALcatel 4060O remove frp done

Operation : Reset FRP
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Android HS-USB QDLoader 9008 (COM23)
Driver Info : TCL, qcusbser.sys,
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000000
OPK_DATA : 9CBA94693C2333A562BCF0E0E981C558748817D002F543B2A2 6AB1B4B3F1CF9E
Initializing Protocol...OK
Sending Loader [prog_emmc_firehose_8909_qct.mbn]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware* : 8909, eMMC, 8 GB
Warning! High Speed Driver is not installed.
Please install driver from QcFireDrivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : TCL Alcatel_4060O [msm8909]
Software : Pixi445Cricket-eng 6.0.1 MMB29M vYA45-UC50 release-keys, vYA45-UC50 [Fri Jun 24 00:01:01 CST 2016]
Android Ver. : 6.0.1
Resetting FRP Lock.........Done
Operation Finished.
Module Ver. 1.2
Read The Rest at Gsmhosting


Iphone firmware | LG stock firmware | Sky Pantech firmware
nạp tiếng việt samsung | nạp tiếng việt oppo | full firmware samsung | FRP samsung | stock rom samsung
Nhà thông minh | Crestron | nhà thông minh Crestron | giải pháp smart home | Crestron việt nam